Pub. 42004-547A
NEMA 4X VoIP Telephones
Page 8 of 17
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-547A.docx
03/20
Open the Telephone
1.
Remove the four screws from the front panel and turn it to the right so that the interior surface faces
out (see Figure 5).
Keep all wiring connected.
2.
Hang the front panel from the front door by hooking a small piece of wire in the mounting holes of
the panel.
Figure 5. Installation and Maintenance Configuration
Field Wiring
Pull the required field cables into the rear enclosure and install the connections as indicated in the
following subsections (see Table 2 for recommended conductor sizes and Figure 6 for wiring details).
N
OTE
:
Consult the National Electrical Code (NFPA 70), Canadian Standards Association (CSA 22.1),
and local codes for the specific requirements regarding your installation. Install all equipment
without modification and according to the local and national codes. Class 2 circuit wiring must
be performed in accordance with the NEC.
