Pub. 42004-534BQG
HUBBCOM™ Handset/Speaker Amplifier Station Quick Installation Guide
Page 4 of 4
\\Dc1vc1fs05\gtcdatac_86h27g1-fs\Product Documentation\Standard IOMs - Current Release\42004 Instr. Manuals\42004-xxxxQG Quick Guides\42004-534BQG.docx
10/20
Figure 3. HUBBCOM Termination and Main PCBA Connections
Front Cover Installation
After all termination and adjustments are complete:
1.
Place the front cover on the rear enclosure.
Do not pinch any cables
2.
Secure the front cover using the four screws and washer provided.
3.
Torque the screws to 10–12 in∙lb (1.13–1.36 N∙m).
Programming
HUBBCOM stations are factory configured to provide basic page/party functions upon power-up. Configure stations for
custom operation and/or larger system designs using the CLI or SP2 Console application. Refer to Publication 42004-784,
SP2 Configuration Guide (see the Reference Documentation section).
Reference Documentation
SP2 Handset/Speaker Amplifier Station ....................................................................................................................... 42004-785
SP2 Configuration Guide .............................................................................................................................................. 42004-784
Approvals
NRTL certified for use in US and Canada ............................................................................................................ UL/CSA 60950
CE Mark
