Pub. 42004-534BQG
G A I - T R O N I C S
®
A H U B B E L L C O M P A N Y
HUBBCOM™ Handset/Speaker Amplifier Station
Quick Installation Guide
GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA
610-777-1374
800-492-1212
Fax: 610-796-5954
V
ISIT WWW
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
General Information
This guide covers the installation of HUBBCOM™ handset/speaker amplifier stations (see Figure 1). Refer to Publication
42004-785 for detailed explanations of the available configuration options and adjustments, system specifications, and
warranty information. GAI-Tronics’ product documentation is on the GAI-Tronics website at
Options
The factory installs and configures standard and optional equipment to default settings.
•
70-volt/100-volt speaker termination PCBA with
24-watt monitored output
•
five configurable alternate page destinations with selector
switch
•
24 V dc power supply
•
PVC or Hytrel
®
handset cords in 6-, 15-, or 25-foot lengths
•
speaker amplifier only (no handset)
•
conformal PCBA coating
•
headset with page pressbar
•
gray powder-coat finish
•
All-Call push button
Settings and Adjustments
Complete the following settings and adjustments after installation:
•
speaker volume
•
series/parallel speaker configuration
•
receiver volume
•
station ID and zone selector
Figure 1. HUBBCOM Handset/Speaker Amplifier Station
