Auteldac 6
7
5
Installation
Please read all these instructions thoroughly before starting installation.
5.1 Dimensions
Four 7mm-clearance holes in the Rear Casing (outside the environmental
seal) allow it to be screwed or bolted to a wall, or to a pole-side mounting kit
(part no 100-02-0208-001).
The holes are arranged in a rectangle, as follows -
•
Horizontal separation between centres: 145.0mm (5.7in)
•
Vertical separation between centres: 270.0mm (10.6in). The lower pair
are about 10mm (0.4in) up from the bottom edge of the unit.
Handset cord lengths:
Standard curled cord: 320mm extending to 1m (13 to 39in).
Standard stainless steel cord: 755mm (29.7in).
Other cord lengths are available as special options: contact GAI-Tronics for
details.
