Pub. 42004-730D
ICS Page/Party
®
AC Plug-in Amplifiers
Page 3 of 21
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-730D.docx
01/22
Installation
CAUTION
—Do not install this equipment in hazardous areas other than those listed in the
section. Such installation may cause a safety hazard and consequent injury or property damage.
ICS Page/Party ac plug-in amplifiers plug directly into the enclosure (see Figure 2). Use extra caution to
prevent damage to the protruding latch wings of connector
P6
, located on the top right edge of the
amplifier, during installation and removal.
Install the ICS Page/Party Plug-in Amplifier
1.
Plug the amplifier directly into the enclosure.
2.
Attach the amplifier to the enclosure with the provided hardware (see Figure 2).
3.
Apply power to the station.
Figure 2. Installation Detail
Enclosure RTU Connection (if applicable)
RTU enclosures provide one double-pole form C relay and one fuse-protected contact. The RTU PCBA
includes a ribbon cable that connects to the VLC or SmartSeries PCBA. If an RTU PCBA is present in
the enclosure, connect the ribbon cable to the receptacle on the top side of the amplifier.
N
OTE
:
When a SmartSeries PCBA has an ADVANCE head end connection, the RTU provides input
status monitoring (to trigger action in the ADVANCE head end), a double-pole form C relay
output contact (
with optional output cable supervision
), and one fuse-protected contact.
