Pub. 42004-519C
Rugged VoIP Autodial Handset Telephones
Page 8 of 26
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-519C.docx
10/19
11.
Seal the conduit entry point(s).
N
OTE
:
Use silicone sealant or equivalent around and inside all conduit entries.
12.
Perform the initial programming of the telephone (see the Programming section).
13.
Verify telephone operation by calling to and from another telephone.
14.
Verify the operation of peripheral equipment.
15.
Replace the front panel assembly and secure it using the eight front panel security screws.
16.
Torque the screws to 10–12 lb
⋅
in (1.1–1.4 Nm).
Figure 8. Model 227-700 Mounting Detail
