4348 LED
- 49”
4324 LED
- 25”
4336 LED
- 37”
4300 Sign/Wall Lighter LED with PicoPrism
™
Installation Instructions
7/29/15 EC150729013 Status B
Part No. 93054283
1.
Coat swivel threads with thread sealant
to keep moisture from entering j-box.
2.
Tighten coupling onto mounting
device.
3.
Attach fixture onto coupling.
WARNING: Fixtures must be grounded in accordance with local codes or the National Electrical
Code. Portable spear mounts must be plugged into a receptacle protected by a Ground Fault Circuit
Interrupter (GFCI) in accordance with the National Electrical Code. Failure to take these steps may result in
serious personal injury. DO NOT operate luminaire with missing or damaged lens.
SAFETY WARNING: To maintain light efficiency and prevent fixture overheating, lenses must
be kept clean and free of dirt, dust, leaves, trash and mineral deposits from water. NOTE: Fixture is
approved for upward aiming only. Do not exceed listed backtilt. Fixture may be aimed downward if protect-
ed from rain and sprinklers.
This KIM fixture is supplied with
K
”
NPT male mounting.
KEEP THIS SHEET FOR FUTURE REFERENCE.
!
!
5.
Attach fixture leads to circuit leads
observing polar-ity, i.e., green ground
lead-to-circuit ground, white-to-com-
mon, and black-to-voltage.
4.
Tighten set screw under j-box cover.
16555 East Gale Avenue
City of Industry, CA 91745-1788
626/968-5666 • FAX 626/968-5716
Tools Required:
q
Phillips Head Screwdriver
q
B
” Allen Wrench
q
Thread Sealant
q
Adjustable Wrench
Make certain electrical supply is
OFF
before starting fixture installation.
!
