Installation Instructions
B228
Tapered Angle Sconce 21-3255 & 21-3256
Page 2 of 2
Hand-Forged,
Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735
26784
To Install Light Bulb and Shield
(Figure 2)
Component Parts
F Socket
G Bulb
(included)
H Bulb
Shield
1.
Install bulb (G).
Be careful not to touch bulb with bare hands; oil from the hands
will dramatically reduce bulb life.
2.
Place bulb shield (H) over bulb (G) and thread onto socket (F).
Be careful not to
over tighten.
To Attach Decorative Face Plate
(Figure 3)
Component Parts
D Fixture
Assembly
I
Decorative Face Plate
1.
Attach decorative face plates (I) to the fixture assembly (D) by inserting
the welded rod attaching the two angled plates into the slots and down
into the notches.
Be sure the rod is seated into both notches.
2.
Restore electricity at main breaker.
Cleaning Instructions
The unique finish on our copper accents is achieved by heating and oxidizing
the surface of the raw copper.
When dusting, gently wipe the surface with a soft damp cloth using a spray wax
if desired. For extra protection and a deep rich finish, a light application of paste
wax once a year is desirable. Never scrub or use an abrasive.
NEVER USE AMMONIA OR SOLVENT-BASED CLEANING
PRODUCTS ON THE COPPER SURFACE.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)
(Figure 3)
