Press "ring correction coefficient" in "set parameter" to calculate the correction data.
Note: with Plate Method, please select "plate correction "to calculate" plate correction
coefficient".
2) Using software:
Input the ideal and measured tension value of distilled water and ethanol on the interface
and then calculate correction coefficient respectively.
3.5 Actual operation
Replace the ethanol or distilled water with the liquid to be tested and repeat the above
operation (3.2 for ring or 3.3 for plate)
IV.Attention
4.1 Low / high value
Platinum plate or ring is not burnt clean (most likely); the beaker is not clean.
