6
failure of the cable to be identified must be identified in sections. At this time, the core wire can be used
as the signal channel for identification, that is, the core wire of the cable start and terminal is grounded
for identification.
3. After turning on the power switch, please do not touch the output terminals and metal leakage parts;
after turning off the power, wait for the output indicator to completely go out before removing the wires to
avoid electric shock.
4. When the device is not used for a long time, please take out the batteries in the host and the receiving
box and store them separately.
VII.Packing List
No.
Item
Qty
1
Main engine
1
2
Output coupling pliers
1
3
Power line
1
4
Special direct continuous radiation (red, black)
2
5
Receiving flexible coil
1
6
Signal receiver
1
7
Fuse pipe
2
8
Alkaline battery ((4 pcs for the tester, 2 pcs for the
receiving box
）
6
