6
Figure 1
Figure 2
The cursor can be moved between Current selection, Phase splitting, Winding
temperature, Conversion temperature, Data query, Clock modification, Host
parameters and other options by pressing the cycle key. The selection key can be
used to select the options contained in the seven main menus mentioned above.
When the cursor chooses the current, press the selection key to select the current.
When the cursor is separated, when the cursor is separated, press the select key,
and the phase can be displayed cyclically between AB, BC, CA, AO, BO, CO, ab, bc,
ca, ao, Bo and Co. Press the start key to move the cursor to the tap, press the select
key number to change between 0-9 (10 bits), press the start key to move the cursor to
one bit, press the select key number to change between 0-9.
When the cursor is in the winding temperature, pressing the start key can make the
cursor scroll between three data bits, and the selection key can make the data of
each data bit circulate between 0 and 9.
When the cursor is in the conversion temperature, press the select key, reduced
