-15-
VIII. Battery Replacement
Please don’t replace battery in flammable spot
Please don’t replace battery during measurement
Pay attention to battery polarity and specification, and don’t
mix use of new and used battery to avoid damage on Tester
When the enclosure of Tester is wet, please do not open
battery cover
Please put the used batteries in appointed collection place.
1.
Switch off; making sure that the Tester is under switch-off state.
2.
Loosen the four screws on battery cover at the bottom of the Tester, and
open battery cover.
3.
Replace new battery, pay attention to battery polarity and specification,
close battery cover, and fasten screw.
4.
Switch on verification, otherwise re-operate.
Summary of Contents for HZRC-3000
Page 2: ......
