1
I. Product overview
This handheld partial-discharge instrument is mainly used for the
detection of high-voltage electrical equipment. This product is simple to
operate and adopts portable structure design which can inspect on line. It
equips with specific sensors to detect various high-pressure devices, which
can detect the insulation state changes inside the equipment timely. So the
insulation failure could be dealt with in time
II. Product configuration
Items
Description
Display screen
3.5 inch color LCD display screen; display resolution: 320 x 240
Sensor
Built-in AE\TEV
External interface
AE\TEV external interface, external synchronization interface, headphone
jack, Micro SD card (16G), charging port, USB port (Backup Interface,
extensible)
Signal interface mode
Front-end built-in AE\TEV sensor;
External sensor (Backup Interface, extensible with Lemo connector)
Shape & size
Length × Width × Height (225mm × 100mm × 40mm)
Weight
0.5kg
III. Technical parameters
1. Conditions of usage
The instrument is internally installed 18650 lithium battery, and the ambient temperature
under normal use condition: -20
℃
- 60
℃
, charging environment: 0
℃
- 45
℃
, storage environment:
-20
℃
- 45
℃
.
Attention: The instrument must be shut down when charging. If the device is on
charge, it cannot be started up for measurement.