Huazheng Electric Manufacturing Co.,Ltd
6
Press Cycle key the cursor can move among
Current select
,
Phase
division
,
Winding temp
,
Convert temp
,
Data query
,
Clock modify
,
Parameters
,etc. Press select key can circle select above 7 menus option. when the
cursor at Winding temp ,press start key the cursor will roll between 3 data bits ,the
select
key can circle display data between 0~9.the Start up key can start any options
besides Winding temp.
3.
Move the cursor to data query menu at the boot state, then press select key enter to
the data query ,press select or start up key to turn pages querying.
4. After selecting the current, press START UP to start the test; When press START
UP, few seconds later, it will display "CHARGING", when it displays "TESTING" that
means the “CHARGING” has been completed. Few seconds after accessing the
TEST STATUS it will show the measured resistance values.
5. After the test: press "RESET" back to boot interface, discharge, alarm,and after the
discharge alarm, please be sure wait for about 10 seconds, re-connection, proceed
the next test or unplug the test cable and end the measurement.
