Track 3 start character
：＋
End character
：？
Enter key is end character of the whole data packet.
VII Wire Connection and Operation
Wire connection refers to the below details information:.
1)Power connector, set the interface to the PC's keyboard interface (power DC5V)
2)Indicator: card swiping succeeds
Light display data is being uploaded (If data is in uploading process, you must wait for data
transfer is completed and then swipe card)
3)Data transfer interface, this interface to connect a PC's serial port (data upload)
Power interface and data transfer port, after the connection is completed, install the company's
Rxx installer (080 426).If the installation is successful, please select the serial interface, enter the
interface and open the serial port for testing. (Or use other serial port with serial assistant software
testing)
RS232 Interface
pin
drawing
Lights indication:
1.
When power connects well, indication light will show green.
2.
When card swiping succeeds, indication light will blink one time.
When card swiping fails, indication light will blink continuously three times.
VIII Caution during operation
8.1 Cards should be inserted in the designated direction, and the speed of card inserting
should be almost same.
8.2 Cards using on the standard machine should comply with ISO7811.
8.3 Magnetic track on the card should not have foreign material, scratch or
incompatible default
8.4 Cards should not put in the position close to magnetic iron to avoid degaussing to card
signal.
8.5 If you need to change the usage of products, please contact us or operate by
technical person.
8.6 If you swipe card too hard or have trouble in swiping card, please clean magnetic head
(Use cleaning cards).
