Huawei VS-EC-H24R User Manual Download

Page: 83 / 248

VS-EC-H24R&H28R&H29R
User Guide

5 Record and Capture Settings

Issue 04 (2013-06-15)

Huawei Proprietary and Confidential

Step 10

Set the Redundant Record/Capture to "Yes".

Step 11

Click "OK" to save settings and back to the upper level menu.

Step 12

Repeat the above steps for configuring other channels.

---End

5.9 Configuring HDD Group for Recording and
Capture

Purpose:

You can group the HDDs and save the record files and captured pictures in certain
HDD group.

Steps:

Step 1

Enter HDD setting interface, as shown in Figure 5-35.

Menu > HDD

Figure 5-35

HDD General

Step 2

Select "Advanced" on the left bar.

Check whether the storage mode of the HDD is Group. If not, set it to Group. For
detailed information, please refer to "10.4 Managing HDD Group".

Step 3

Select "General" in the left bar.

Click

to enter editing interface.

Summary of Contents for VS-EC-H24R

























































































































































































































































Search results

Summary of Contents for VS-EC-H24R

Reviews:

Related manuals for VS-EC-H24R

Brands by name

Popular brands

Huawei VS-EC-H24R, User Manual

Search results

Summary of Contents for VS-EC-H24R

Reviews:

Related manuals for VS-EC-H24R

Brands by name

Popular brands