2
Verifying the Installation
After the installation is complete, check the following to ensure the camera's
tracking performance:
●
Ensure that the bottom of the VPT300 base is 1.5 m to 1.7 m (4.9 ft to 5.6 ft)
above the ground.
●
Remove the protective film (as shown in
) from the lens of the
dual-camera system.
Figure 2-1
Lens protective film of the dual-camera system
●
When mounting the VPT300 on a flat surface such as a table, align the front
edge of the VPT300 with the table edge (as shown in
) to prevent
the lens of the dual-camera system from being blocked.
VPT300 Intelligent Camera
Installation and Commissioning Guide
（
Single-
VPT300
）
2 Verifying the Installation
Issue 04 (2020-02-11)
Copyright © Huawei Technologies Co., Ltd.
17
