Procedure
Step 1
Download the latest version of PuTTY from the chiark website, and install PuTTY on the
local PC.
NOTE
Use the latest version of PuTTY, otherwise you may fail to log in to the server.
Step 2
Connect the local PC to the iBMC management network port on the server by using a network
cable.
Step 3
Set an IP address and a subnet mask or add route information for the PC to communicate with
the server.
On the PC command-line interface (CLI), run the following command to check whether the IP
address is reachable:
Ping Server IP address
l
If yes, go to
.
l
If no, check the network connection, rectify the fault, and go to
Step 4
Double-click
PuTTY.exe
.
The
PuTTY Configuration
window is displayed, as shown in
Figure 14-18
PuTTY Configuration window
2288H V5 Server
User Guide
14 Common Operations
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
273