Step 9
If the server is equipped with a front bezel, install the bezel after installing the front drive. For
details, see
5.2.2 Installing the Front Bezel
Step 10
If you need to restore data on the newly installed drive, see
Troubleshooting
>
Hard Drive
Fault
of the corresponding RAID controller card in the
Huawei V5 Server RAID Controller
Step 11
Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the
Huawei Rack Server iBMC User Guide
----End
5.3.3 Removing an NVMe SSD
NOTE
l
NVMe SSDs support only orderly hot swap. Before removing an NVMe SSD, stop all services
accessing the NVMe SSD.
l
Back up data on the NVMe SSD to be removed.
l
Wait until the hot removal of an NVMe SSD is complete before you remove another one.
Windows
Step 1
Stop all services that access the NVMe SSD to be removed.
Step 2
Install the Windows tool package. For details, see
Installation and Configuration
>
Installing the Tool Package
>
Installing the Tool Package (Windows)
in the
.
Step 3
Double-click the
HioadmGUI_DotNet_x.0.exe
file in the tool installation directory to
display the Windows GUI window, as shown in
l
If the .NET Framework version is 2.0 or 3.5, double-click the
HioadmGUI_DotNet_2.0.exe
file in the tool installation directory.
l
If the .NET Framework version is 4.0 or 4.5, double-click the
HioadmGUI_DotNet_4.0.exe
file in the tool installation directory.
Figure 5-10
Basic information
2288H V5 Server
User Guide
5 Optional Part Installation
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
120