Figure 4-39
Boot screen
Step 2
Select
Boot Type
, and press
Enter
.
Step 3
In the displayed dialog box, select
Legacy Boot
or
UEFI Boot
, and press
Enter
.
NOTE
l
The BIOS of the V5 platform uses the UEFI mode by default. If the legacy mode is used, ensure that
the sum of option ROMs of all PCIe devices does not exceed the upper limit (128 KB) specified by
Intel. Otherwise, some PCIe devices may become unavailable.
l
If the capacity of the target hard drive or RAID group is greater than 2 TB, set
Boot Type
to
UEFI
Boot
.
l
If the OS is to be installed on an NVMe hard drive, you can only set
Boot Type
to
UEFI Boot
.
Step 4
Select
Boot Sequence
and press
Enter
.
The
Boot Sequence
screen is displayed.
NOTE
The default boot sequence is
Hard Disk Drive
>
DVD-ROM Drive
>
PXE
>
Others
.
Step 5
Select a boot option and press
F5
or
F6
to change the boot order.
l
Press
F5
to move a boot option down.
l
Press
F6
to move a boot option up.
NOTE
The server will boot in the order displayed.
----End
Set the PXE.
2288H V5 Server
User Guide
4 Setup
Issue 04 (2018-09-04)
Copyright © Huawei Technologies Co., Ltd.
108