Huawei V100R002C01 User Manual Download Page 9

Page: 9 / 122

Security

About This Chapter

This topic describes the safety precautions to be observed when you install and maintain devices.

1.1 Overview

This document describes the safety information you must comply with when installing and
maintaining the devices.

1.2 General Safety Notice

This topic describes the safety precautions you must take before installing or maintaining Huawei
equipment.

1.3 Labels on Devices

This topic describes the warning labels, grounding labels, and electrostatic discharge (ESD)
labels on devices.

1.4 General Requirements

To minimize risk of personal injury and damage to equipment, read and follow all the precautions
in this document before performing any installation or maintenance.

1.5 Inflammable Environment

This topic describes safety notice about inflammable environment.

1.6 Battery

This topic describes safety notice about storage battery and lithium battery.

1.7 Radiation

This topic describes safety notice about electromagnetic field exposure and laser.

1.8 Working at Heights

This topic describes safety notice about hoisting heavy objects and using ladders

1.9 Mechanical Safety

This topic describes how to deal with drilling holes, sharp objects, handling fans and lifting
heavy objects.

1.10 ES3000 Safety Precautions

This topic describes the safety precautions for operating the ES3000.

Tecal ES3000 High Performance PCIe SSD Card
User Guide

1 Security

Issue 04 (2014-03-05)

Huawei Proprietary and Confidential

Summary of Contents for V100R002C01



























































































































Search results

Summary of Contents for V100R002C01

Reviews:

Related manuals for V100R002C01

Brands by name

Popular brands

Huawei V100R002C01, User Manual

Search results

Summary of Contents for V100R002C01

Reviews:

Related manuals for V100R002C01

Brands by name

Popular brands