Huawei V100R002C01 User Manual Download Page 46

Page: 46 / 122

If you use the ESX 4.1 OS, run the following command to install the ES3000 driver:

rpm -ivh hio-2.0.0.5.x86_64.rpm

The command output is as follows:

Preparing... ########################################### [100%]
1:hio ########################################### [100%]

If you use the ESXi 5.0 OS, run the following command to install the ES3000 driver:

esxcli software vib install -v driver_package_path --no-sig-check --maintenance-mode

The following is an example:

esxcli software vib install -v /hio-2.0.0.5.vib --no-sig-check --maintenance-mode

NOTE

2.0.0.5

in the driver file name indicates the software version, and the actual version may be different.

Step 3

Restart the OS.

Step 4

Run the following command to check that the device is detected:

hio_info

----End

Driver Parameters

The following information describes the ES3000 driver parameter in VMware.

The command syntax is as follows:

esxcli system module parameters set -m hio -p Parameter

Value

NOTE

The new settings take effect after the ESX(i) restarts.

Table 3-3

describes the driver parameters.

Table 3-3

Driver parameter description

Parameter

Default Value

Description

dev_type

The options are as follows:

: block mode. Registered

as a standard block
device, which uses less
system resources.

: SCSI mode. Simulated

as a SCSI device, which
improves the concurrent
processing capability of
the PCIe SSD.

Tecal ES3000 High Performance PCIe SSD Card
User Guide

3 Installation and Configuration

Issue 04 (2014-03-05)

Huawei Proprietary and Confidential

Summary of Contents for V100R002C01



























































































































Search results

Summary of Contents for V100R002C01

Reviews:

Related manuals for V100R002C01

Brands by name

Popular brands

Huawei V100R002C01, User Manual

Search results

Summary of Contents for V100R002C01

Reviews:

Related manuals for V100R002C01

Brands by name

Popular brands