Huawei USG6000 Series, Hardware Manual

Page: 170 / 415

l
1 out-of-band management port (RJ45)
l
1 console port (RJ45)
l 1 console port (mini USB)
l 2 USB 2.0 ports
By default, the USG6650/6660 has a 2XG8GE interface cards and an 8GEF interface card to
provide the following service ports:
l 8 GE optical ports
l 8 10/100/1000M autosensing Ethernet electrical ports
l 2 10GE optical ports
The six expansion slots on the USG6650/6660 support the expansion cards listed in Table
2-60 .
NOTE
The slots are divided into two types: one for Wide Service Interface Cards (WSIC) and the other for
Extended Service Interface Cards (XSIC). An XSIC is twice as high as a WSIC. An XSIC slot can also
hold a WSIC card, but only in the lower part, and in this case, no other card can be installed in the upper
part.
Table 2-60 Supported expansion cards
Expansion Card Description
8GE WSIC Interface Card Provides eight gigabit RJ45 Ethernet ports.
2XG8GE WSIC Interface Card Provides eight gigabit RJ45 ports and two
10-gigabit SFP+ ports.
8GEF WSIC Interface Card Provides eight gigabit SFP ports.
4GE-BYPASS WSIC Card Provides two electrical bypass links.
2.3.2.2 Front Panel
By default, the USG6650/6660 front panel has a 2XG8GE interface card, an 8GEF interface
card, a protective ground terminal, an ESD jack, and some expansion slots.
The front panel of the USG6650/6660 is pictured in Figure 2-73 .
HUAWEI USG6000 Series
Hardware Guide
2 Hardware Overview
Issue 08 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
156