manualshive.com logo in svg

Huawei u8800, Maintenance Manual

The Huawei u8800 is an exceptional smartphone that combines cutting-edge technology with sleek design. With its user-friendly interface and powerful features, it is ideal for tech-savvy individuals. For easy setup and troubleshooting, download the free user manual from manualshive.com to access step-by-step instructions and handy FAQs.

Share
Download
background image

 

U8800 Maintenance Manual Basic Version V1.1 

Internal 

 

2011-03-21 

Huawei confidential. No spreading without permission. 

Page 28 of 61

 

   

 

   

 

   

 

16. Assemble BTB connector of the mainboard. 

 

15. Install the coaxial cable. 

 

14. Install the mainboard and note the coaxial cable. 

 

13. Install connector of the TF card FPC. 

 

12. Install the TF card FPC. 

 

11. Install the power & volume key FPC. 

 

Summary of Contents for u8800






























































Reviews:

No comments

Related manuals for u8800

NEC Univerge SV8100 Reference Sheet preview
Univerge SV8100
Brand: NEC Pages: 4
Yealink T3 Series User Manual preview
T3 Series
Brand: Yealink Pages: 87
Accutone V10 Install Manual & User Manual preview
V10
Brand: Accutone Pages: 10
Sagem MYMOBILE TV Guide Utilisateur preview
MYMOBILE TV
Brand: Sagem Pages: 72
Sagem MY 302X Manual preview
MY 302X
Brand: Sagem Pages: 63
Sagem myX-1 twin User Manual preview
myX-1 twin
Brand: Sagem Pages: 77
Yealink VP-2009 Getting Started Manual preview
VP-2009
Brand: Yealink Pages: 64
Maxcom MM823 User Manual preview
MM823
Brand: Maxcom Pages: 109
WELLTECH LP399 Series User Manual preview
LP399 Series
Brand: WELLTECH Pages: 47
V7 Zyro User Manual preview
Zyro
Brand: V7 Pages: 20
Handspring Handspring Treo 180g User Manual preview
Handspring Treo 180g
Brand: Handspring Pages: 253
iPRIMUS Lingo 302 Quick Start Manual preview
Lingo 302
Brand: iPRIMUS Pages: 2
HI-SKY SKYSTER T650 User Manual preview
SKYSTER T650
Brand: HI-SKY Pages: 22
Myria L600 User Manual preview
L600
Brand: Myria Pages: 76
Acer P400 User Manual preview
P400
Brand: Acer Pages: 91
Acer P300 User Manual preview
P300
Brand: Acer Pages: 96
Acer V370 User Manual preview
V370
Brand: Acer Pages: 51
Acer Liquid Z330 User Manual preview
Liquid Z330
Brand: Acer Pages: 77

Brands by name

Popular brands

Load more brands