19
DC Group calls with iDEN users are not possible.
1.
Select a group from Contacts or Call log, or select multiple
contacts from the contact list to create a temporary DC Group.
You can also enter the DC numbers to create a DC Group.
2.
Push the DC button to start the DC Group call directly, or
press the left soft key to select Invite and push the DC button
to send an invitation to all group members. When the group
members receive the invitation, they can select Join to join the
call or select Reject to reject the invitation.
A DC Group can contain a maximum of 25 members.
During a DC Group call, you can view the participant status
of group members, access Contacts and Messages, add a
member to the call, or write a memo.
Adding Members to a DC Call
During a DC call do the following to add members to the call:
Select Option > Add Member to select members from Contacts
or Call log, or directly enter DC numbers on the Enter number
screen. Then press the left soft key to select Done. An invitation
will be sent to the desired members.
Joining a DC Call After it has Started
If a DC Group call has ended when you receive the invitation,
after you select Join by pressing the left soft key, the phone
displays "The call is not running. Restart the call?".
If you select Yes, the phone displays "Push DC button to start
call". Then you can push and hold the DC button to make a
DC group call to the Group.
If you select No, no operation will be performed.
