The multi-view layout can be Picture in Picture (PiP), 2-pane, or 3-pane modes. In PiP mode,
the PiP window can be in the upper left, upper right, lower left, or lower right corner. One
input can be configured to show in one or more panes, but the input cannot be a remote video
source.
5.8 Screen Layout Adjustment
By adjusting the screen layout, you can view multiple channels of video on the same monitor.
The screen layout can be Full-screen, PiP, 2-pane, and 3-pane.
l
Full-screen: Only one channel of video or presentation is available, and it is displayed in
full-screen mode.
l
PiP: One channel of video is displayed in full-screen mode, and at the same time, another
channel of video is displayed in an inset window that can appear in any corner of the
display. By default, the smaller video is displayed in the lower right corner and is
approximately 1/16 of the full-screen video.
l
2-pane: Users view two sites on a single monitor in two panes. The two panes are of the
same size and can display video or presentation.
l
3-pane: Users view three sites on a single monitor in three panes. Each pane is about 1/3
of the screen and can display video or presentation.
Figure 5-6
Sample screen layouts
5.9 Simultaneous Transmission of Video and Presentation
The endpoint can simultaneously send video and content in P2P and multipoint conferences.
It perfectly combines motionless shared content with motional video of participants to deliver
TX50 Videoconferencing Endpoint
Product Overview
5 Functions and Features
Issue 05 (2017-10-31)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19
