HUAWEI TP1102 Telepresence
Administrator Guide
3 Using the Touch Panel
Issue 01 (2013-07-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21
3.5 Setting Security Parameters
Context
You can set the password for accessing
Advanced Settings
on the touch panel. This password
helps protect conference control information on the touch panel.
Procedure
Step 1
Choose
>
Settings
>
Advanced Settings
>
Security Settings
.
Step 2
In
Current password
, enter the current password. By default, no password is set.
Step 3
In
New password
and
Confirm password
, enter a new password.
Step 4
Tap
OK
.
----End
Follow-up Procedure
If you forget this password, select
Huawei Telepresence
from the touch panel's application
list and tap
Clear Data
. After you remove the custom data, you must set the connection
parameters again to connect to the telepresence host. If the connection to the telepresence host
fails and a message is displayed to indicate that another user has logged in, reconnect to the
telepresence host after 2 minutes.
3.6 Setting General Conference Parameters
Context
Before placing calls, set general conference parameters.
Procedure
Step 1
Tap
>
Settings
>
General Conference Settings
.
Step 2
Set the parameters described in
Table 3-3
General Conference parameters
Parameter
Description
Dial number
type
Specifies the line type used to call a site.
Rate
Specifies the conference bandwidth.
Conference
password
Specifies the conference password. This password is required for a site
to request chair control rights and allows anonymous sites to join the
conference.