Huawei Tecal RH5485 Installation And User Manual Download Page 75

Page: 75 / 96

Tecal RH5485 Server
Installation and User’s Guide

2 Installing optional devices

Issue 02 (2011-05-25)

Huawei Proprietary and Confidential

2-47

Figure 2-39

Open the release socket lever

8. Remove the microprocessor socket dust cover from the surface of the microprocessor
socket, if one is present. Store the dust cover in a safe place.

9. Install the microprocessor in the microprocessor installation tool.

a. Touch the static-protective package that contains the new microprocessor to any
unpainted metal surface on the outside of the server.

b. Twist the handle of the installation tool counterclockwise so that it is in the open
position.

c. Using the triangle on the microprocessor to align it with the installation tool, place
the microprocessor on the underside of the tool.

d. Twist the handle of the installation tool clockwise to secure the microprocessor in
the tool.

NOTE

You can pick up or release the microprocessor by twisting the microprocessor installation tool handle.

Figure 2-40

Pick up the microprocessor

Summary of Contents for Tecal RH5485

































































































Search results

Summary of Contents for Tecal RH5485

Reviews:

Brands by name

Popular brands

Huawei Tecal RH5485, Installation And User Manual

Search results

Summary of Contents for Tecal RH5485

Reviews:

Brands by name

Popular brands