Huawei TaiShan 200 23280 User Manual Download Page 140

Page: 140 / 191

Figure 8-10 Login interface

Step 5 Enter the network address, user name, and password.

The network address can be in any of the following formats:

●

iBMC management network port IP address (IPv4 or IPv6 address): Port

number

●

iBMC domain name address: Port number

NO TE

● Enter an IPv6 address in brackets or an IPv4 address directly, for example, [2001::64]:

444 or 192.168.100.1:444.

● When the port number is the default port number 443, the port number can be left

blank.

Step 6 Select a login mode, and click Connect.

●

Shared Mode: allows two users to access and manage a server at the same

time. The two users can see each other's operations.

●

Private Mode: allows only one user to access and manage a server at a time.

Information shown in

Figure 8-11

is displayed.

Figure 8-11 Security risk information

Step 7 Perform any of the following operations based on the actual situation:

●

Click Yes to open the IRC.

●

Click No to return to the login interface.

TaiShan 200 Server (Model 2280)

User Guide

8 Common Operations (iBMC V250 or Later)

Issue 09 (2021-01-12)

132

Summary of Contents for TaiShan 200 23280
































































































































































































Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands

Huawei TaiShan 200 23280, User Manual

Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands