Huawei TaiShan 200 23280 User Manual Download Page 107

Page: 107 / 191

Step 5 On the login page, enter the user name and password for logging in to the iBMC

WebUI.
The default user name of the iBMC is Administrator, and the default password is

Admin@9000.

NO TE

The user account will be locked after five consecutive login failures with wrong passwords.

If your user account is locked, log in again 5 minutes later.

Step 6 Select This iBMC from the Domain drop-down list.
Step 7 Click Log In.

----End

5.12.5 Checking the Server

Check the server in the sequence shown in

Figure 5-60

. The method to be used

depends on the actual situation.
For details about CLI commands, see

TaiShan Rack Server iBMC User Guide

Figure 5-60 Checking the server

TaiShan 200 Server (Model 2280)

User Guide

5 Installation and Configuration

Issue 09 (2021-01-12)

Summary of Contents for TaiShan 200 23280
































































































































































































Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands

Huawei TaiShan 200 23280, User Manual

Search results

Summary of Contents for TaiShan 200 23280

Reviews:

Related manuals for TaiShan 200 23280

Brands by name

Popular brands