manualshive.com logo in svg

Huawei TaiShan 200 2280, Maintenance And Service Manual

Introducing the Huawei TaiShan 200 2280, a cutting-edge product designed to optimize your browsing experience. With its durable construction and advanced features, our Maintenance And Service Manual is now available for easy download. Enhance the longevity of your device by accessing this free manual today, exclusively from manualshive.com.

Share
Download
background image

Figure 2-36 Riser card 4 (one x16 slot)

●

When the server is configured with Kunpeng 920 7260, 5250, or 5230

processors, the SAS riser card shown in 

Figure 2-37

 can be installed in I/O

module 1 or 2. By default, it is installed in I/O module 2. When installed in I/O

module 1, it occupies PCIe slots 1 to 3 and only slot 3 (x8) is available. When

installed in I/O module 2, it occupies PCIe slots 4 to 6 and only slot 6 (x8) is

available. When the server is configured with Kunpeng 920 5220 or 3210

processors, the SAS riser card can be installed only in I/O module 2 and

occupies PCIe slots 4 to 6. Slots 4 and 5 do not output signals, and slot 6

supports x8 signals.

Figure 2-37 Riser card 5 (SAS)

Figure 2-38

 and 

Figure 2-39

 show riser cards supported by I/O module 3.

●

When installed in I/O module 3, the riser card shown in 

Figure 2-38

 provides

PCIe slots 7 and 8

TaiShan 200 Server

Maintenance and Service Guide (Model 2280)

2 Components

Issue 04 (2020-01-16)

Copyright © Huawei Technologies Co., Ltd.

35

Summary of Contents for TaiShan 200 2280


















































































































































































































Reviews:

No comments

Related manuals for TaiShan 200 2280

R&S SpycerNode 2U12 User Manual preview
SpycerNode 2U12
Brand: R&S Pages: 136
Rackable Systems S3116-NAS Getting Started Manual preview
S3116-NAS
Brand: Rackable Systems Pages: 4
Supero SuperServer 6123L-8R User Manual preview
SuperServer 6123L-8R
Brand: Supero Pages: 105
Digi PortServer/16 User Manual preview
PortServer/16
Brand: Digi Pages: 118
Lava Lava DATATAP-IP Specifications preview
Lava DATATAP-IP
Brand: Lava Pages: 2
IBM @server x Series Quick Setup Manual preview
@server x Series
Brand: IBM Pages: 8
Monoprice 12186 User Manual preview
12186
Brand: Monoprice Pages: 5
CNET CNP-101U Hardware User'S Manual preview
CNP-101U
Brand: CNET Pages: 14
EVS GX User Manual preview
GX
Brand: EVS Pages: 74
Axis NPS 650 Quick Installation Manual preview
NPS 650
Brand: Axis Pages: 10
Bosanova RBT-320 Quick Start Manual preview
RBT-320
Brand: Bosanova Pages: 2
DM&P Group eBOX-3800 EmbedBox User Manual preview
eBOX-3800 EmbedBox
Brand: DM&P Group Pages: 28
Axis AXIS 570 User Manual preview
AXIS 570
Brand: Axis Pages: 316
GeoVision GV-Storage System Quick Start Manual preview
GV-Storage System
Brand: GeoVision Pages: 9
Inspur i24 Server Acceptance Manual preview
i24
Brand: Inspur Pages: 37
Dell EMC PowerEdge T440 Installation And Service Manual preview
PowerEdge T440
Brand: Dell EMC Pages: 154
Dell EMC PowerEdge R240 Installation And Service Manual preview
PowerEdge R240
Brand: Dell EMC Pages: 127
Digitus DN-13003-1 User Manual preview
DN-13003-1
Brand: Digitus Pages: 79

Brands by name

Popular brands

Load more brands