Copyright © Huawei Technologies Co., Ltd. 2015. All rights reserved.
All other trademarks and trade names mentioned in this document are the
property of their respective holders.
HUAWEI SVN5630/5660/5830/5850
V200R003
Quick Start
Issue: 02
Part Number: 31507272
Date: 2015-06-18
1
Thank you for using Huawei SVN5630/5660/5830/5850 products. This product can serve as a remote access gateway to
provide low-cost SSL VPN services. This document describes the appearance, cabling, and network and basic SSL VPN
con
fi
gurations of the device. For detailed hardware description and installation guidelines, refer to the
Hardware Guide
. For
detailed con
fi
gurations, refer to the
Administrator Guide
.
Safety Precautions
Be aware of the following safety precautions when installing the device.
•
Deactivate power whenever possible before performing maintenance on power cables.
•
Always wear a properly-grounded wrist strap before touching the device or expansion cards in it.
Device and Accessories
Your product package includes the following items:
SVN5800
4 HDD
5 PWR 6 PWR
INPUT OUTPUT
ON
OFF
~100-240V;50/60Hz;2.5A
XXXXXXXXXXXXXXXXXXXXXXXXXXX
SM-HDD-SAS300G-B
SVN5800
0
1
2
3
4
5
6
7
8
9
10
11
0
1
RST
SYS
ALM
PWR
HDD
MGMT
MODE
0/1
2
3
CONSOLE
MGMT
WSIC(Slot 3)
WSIC(Slot 2)
4 HDD
5 PWR 6 PWR
4x1GE SFP
Rubber feet
Management
port
Console port
ESD jack
Protection ground
terminal
Power socket
PGND cable
Power cable
retention clip
Quick start
M4
screw
Rack-mounting ears
AC power cable
M6
screw
Equipment
Serial Number
10/100/1000M autosensing
Ethernet electrical port
0/1
2
3
Front panel
Rear panel
The
fi
gure above uses the SVN5660/5830/5850 as an example. The
fi
xed interface board on the front panel provides 8
10/100/1000M autosensing Ethernet electrical ports, 4 GE optical ports, and 2 USB ports. The power module on the rear pan-
el is removable. For the SVN5630, the
fi
xed interface board on the front panel provides 6 service ports (4 GE electrical ports
and 2 combo ports) and 1 USB port, and the power module on the rear panel is non-removable.
AC power cables vary by country or area, and the AC power cable in the
fi
gure is used for reference only.
Cabling
•
One-armed mode: Connect the device to a router or
fi
rewall out-of-path. This mode requires fewer
ports and does not change existing network topology.
1. Connect the ground terminal on the device to the ground bar using a PGND cable.
2. Connect port GE1/0/4, for example, to a router or firewall.
3. Connect the device's MGMT port to a PC where the NMS client is installed using a network cable.
4. Insert the cable retention clip into the hole close to the power socket. Then insert the power cable into the socket, and fix
it using the clip.
