Huawei SUN2000-60KTL-M0 User Manual Download Page 82

Page: 82 / 127

Table 7-3 LED indicator description

LED Indicator

Status

Meaning

Green off

There is no operation

with a USB flash drive.

Blinking green slowly

There is an operation

with a USB flash drive.

Blinking green fast

An operation with a

USB flash drive has

failed.

Steady green

An operation with a

USB flash drive is

successful.

7.1.4 Upgrading

Procedure

1. Download the required software upgrade package from the technical support

website.

2. Decompress the upgrade package.

NO TE

If the login password for logging into the SUN2000 app or entering the Device

Commissioning screen on the FusionSolar app is the initial password, you do not need

to perform steps

. If not, perform steps

3. Click Local maintenance script on the app to generate a boot script file, see

the

FusionSolar APP and SUN2000 APP User Manual

4. Import the boot script file to a PC.
5. Replace the boot script file (sun_lmt_mgr_cmd.emap) in the upgrade package

with the one generated by the app.

6. Copy the extracted files to the root directory of the USB flash drive.
7. Connect the USB flash drive to the USB port. The system automatically

identifies the USB flash drive and executes all commands specified in the boot

script file. View the LED indicator to determine the operating status.

NO TICE

Ensure that the ciphertext in the boot script matches the login password for

logging into the SUN2000 app or entering the Device Commissioning screen

on the FusionSolar app. Otherwise, the user account will be locked for 10

minutes after the USB flash drive is inserted for five consecutive times.

SUN2000-(60KTL, 65KTL)-M0

User Manual (Mexico Edition)

7 Man-Machine Interactions

Issue 06 (2020-10-12)

Summary of Contents for SUN2000-60KTL-M0
































































































































Search results

Summary of Contents for SUN2000-60KTL-M0

Reviews:

Related manuals for SUN2000-60KTL-M0

Brands by name

Popular brands

Huawei SUN2000-60KTL-M0, User Manual

Search results

Summary of Contents for SUN2000-60KTL-M0

Reviews:

Related manuals for SUN2000-60KTL-M0

Brands by name

Popular brands