8
Handling the Inverter
8.1 Removing the SUN2000
NO TICE
Before removing the SUN2000, disconnect both the AC and DC power supplies.
After powering off the SUN2000, wait at least 5 minutes before performing
operations on the SUN2000.
Perform the following operations to remove the SUN2000:
1. Disconnect all cables from the SUN2000, including RS485 communications
cables, DC input power cables, AC output power cables, and PGND cables.
2. Remove the SUN2000 from the mounting bracket.
3. Remove the mounting bracket.
8.2 Packing the SUN2000
●
If the original packing materials are available, put the SUN2000 inside them
and then seal them by using adhesive tape.
●
If the original packing materials are not available, put the SUN2000 inside a
suitable cardboard box and seal it properly.
8.3 Disposing of the SUN2000
If the SUN2000 service life expires, dispose of it according to the local disposal
rules for electrical equipment waste.
SUN2000-(12KTL, 15KTL, 17KTL, 20KTL)-M0
User Manual
8 Handling the Inverter
Issue 06 (2020-07-02)
Copyright © Huawei Technologies Co., Ltd.
78
