manualshive.com logo in svg

Huawei SUN2000-10KTL-M0, User Manual

Share
Download
Huawei SUN2000-10KTL-M0 User Manual Download Page 18

Category

Status

Meaning

Note a: The AC may be on. Check whether the external AC switch is OFF.

 

2.3 Label Description

2.3.1 Enclosure Labels

Symbol

Name

Meaning

Delayed discharge

Residual voltage exists after

the SUN2000 is powered off.

It takes 5 minutes for the

SUN2000 to discharge to

the safe voltage.

Burn warning

Do not touch an operating

SUN2000 because it

generates high temperatures

on the shell.

Electric shock warning label

● High voltage exists after

the SUN2000 is powered

on. Only qualified and

trained electrical

technicians are allowed

to perform operations on

the SUN2000.

● High touch current exists

after the SUN2000 is

powered on. Ensure that

the SUN2000 has been

grounded before

powering on it.

Refer to documentation

Reminds operators to refer

to the documents shipped

with the SUN2000.

Grounding

Indicates the position for

connecting the protective

earthing (PE) cable.

SUN2000-(12KTL, 15KTL, 17KTL, 20KTL)-M0

User Manual

2 Overview

Issue 06 (2020-07-02)

Copyright © Huawei Technologies Co., Ltd.

11

Summary of Contents for SUN2000-10KTL-M0

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands