Huawei SUN2000-100KTL User Manual Download Page 21

Page: 21 / 156

Symbol

Name

Meaning

Grounding

Indicates the position for connecting

the protective earthing (PE) cable.

Operation warning

Do not remove the DC input

connector when the inverter is

running.

Switching operation

warning

The DC switch may fail to switch off

automatically when it is not

completely closed.

Fan operation warning

High voltage exists after the inverter

is powered on. Do not touch the

fans when the inverter is working.

Fan replacement warning Before replacing a fan, disconnect its

power connectors.

Inverter ESN label

Indicates the inverter serial number.

Weight label

The inverter needs to be carried by

four persons or using a pallet truck.

2.4 Product Appearance

SUN2000-(75KTL, 100KTL, 110KTL, 125KTL) Series

User Manual

2 Overview

Issue 11 (2021-11-10)

Summary of Contents for SUN2000-100KTL





























































































































































Search results

Summary of Contents for SUN2000-100KTL

Reviews:

Related manuals for SUN2000-100KTL

Brands by name

Popular brands

Huawei SUN2000-100KTL, User Manual

Search results

Summary of Contents for SUN2000-100KTL

Reviews:

Related manuals for SUN2000-100KTL

Brands by name

Popular brands