Figure 3-7
Setting the terminal emulation type
Step 5
Set the line delay and the character delay.
Click
ASCII Setup
. In the dialog box that is displayed, set
Line delay
to 200 ms and
Character
delay
to 200 ms, and use default values for other parameters. Click
OK
NOTE
l
By default,
Line delay
is 0, and
Character delay
is 0.
l
When you paste a text to the HyperTerminal, the character delay controls the character transmit speed,
and the line delay controls the interval of transmitting every line. If a delay is very short, loss of
characters occurs. When the pasted text is displayed abnormally, modify the delay.
SmartAX MA5616 Multi-service Access Module
Configuration Guide
3 Basic Configuration
Issue 04 (2011-10-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17
