Figure 3-3
Setting up a connection
2.
Set the serial port.
On the PC that is connected to the MA5616, select the number of the standard character
terminal or PC terminal serial port. You can select "COM1" or "COM2". In this example,
"COM2" is selected, as shown in
OK
.
Figure 3-4
Selecting the serial port ID
Step 3
Set the communication parameters of the HyperTerminal.
Set the parameters in the
COM2 Properties
dialog box, as shown in
. The parameters
are as follows:
SmartAX MA5616 Multi-service Access Module
Configuration Guide
3 Basic Configuration
Issue 04 (2011-10-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14
