Huawei S2750, Hardware Description

Page: 24 / 56

Display Mode Color Description
Green l Steady on:
The switch is not the master switch in
a stack.
–
If the indicator of a port is steady on,
the number of this port is the stack
ID of the switch.
–
If the first nine port indicators are
steady on, the stack ID of the switch
is 0.
l Blinking:
The switch is the master switch in a
stack.
– If the indicator of a port is blinking,
the number of this port is the stack
ID of the switch.
– If the first nine port indicators are
blinking, the stack ID of the switch
is 0.
2.3.4 Port Description
10/100BASE-TX Ethernet Electrical Port
A 10/100BASE-TX Ethernet electrical port sends and receives service data at 10/100 Mbit/s,
and must use
3.3 Network Cable . Table 2-7 lists the attributes of a 10/100BASE-TX Ethernet
electrical port.
Table 2-7 Attributes of a 10/100BASE-TX Ethernet electrical port
Attribute Item
Connector type RJ45
Standards
compliance IEEE802.3, IEEE802.3u, IEEE802.3ab
Electrical port
attributes MDI/MDIX
NOTE
l A medium dependent interface (MDI) provides the physical and electrical
connection to the cabling medium. Ethernet ports of most NICs are MDIs.
l
A medium dependent interface crossover (MDIX) enables connection
between like devices. MDIX ports are usually used on hubs or LAN switches.
S2750 Series Ethernet Switches
Hardware Description
2 Chassis
Issue 04 (2014-03-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18