manualshive.com logo in svg

Huawei RRU3931E, Maintenance Manual, Page: 8 / 12

Share
Download
Huawei RRU3931E Maintenance Manual Download Page 8

1.3.2 Powering Off a RRU3931E

This section describes how to power off a RRU3931E.

Procedure

Step 1

Switch off the external power supply equipment for the RRU3931E.

----End

1.4 Replacing a RRU3931E

RRU3931Es employ modular design and faulty ones must be replaced promptly. Replacing a
RRU3931E interrupts all ongoing services carried by it.

Prerequisites

l

Tools and materials, such as electrostatic discharge (ESD) gloves, torque wrench, and
M10 hex key screwdriver, are ready.

l

The RRU3931E to be replaced has been confirmed, and a new RRU3931E has been
prepared.

l

You have obtained site visit permission.

Procedure

Step 1

Ask the network operator to perform the following preparations for a RRU3931E
replacement:

1.

Block all the cells served by the RRU3931E to be replaced.

–

Run the 

BLK CELL

 command if the RRU3931E works in LTE mode.

–

Run the 

BLK ULOCELL

 command if the RRU3931E works in UMTS mode.

2.

Change the SN to that of the new RRU3931E.

3.

Upload a configuration file for the new RRU3931E over FTP. For details, see

RRU3931E Commissioning Guide

.

4.

Copy the configuration file and required software package to a TF card or a laptop where
the LMT has been installed.

NOTICE

Do not touch the RRU3931E that is just powered off until it cools down.

Step 2

Switch off the external power supply equipment for the RRU3931E to be replaced.

NOTICE

Take proper ESD protection measures, for example, wear ESD gloves, to prevent electrostatic
damage to the RRU3931E or its electronic components.

RRU3931E
Site Maintenance Guid

1 RRU3931E Site Maintenance Guide

Issue Draft A (2016-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

5

Summary of Contents for RRU3931E













Reviews:

No comments