manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 17

2

 Overview

About This Chapter

This section describes the features of the RH2288 V3.

2.1 Introduction

2.2 Appearance

2.3 Ports

2.4 Indicators and Buttons

2.5 Physical Structure

2.6 Mainboard Layout

2.7 Internal Cabling

2.8 Logical Structure

2.9 RAS Features

2.10 Software and Hardware Compatibility

2.11 Technical Specifications

2.12 Physical and Environmental Specifications

2.1 Introduction

The RH2288 V3 (marked as H22M-03 on the nameplate) is a 2U dual-socket rack server
launched by Huawei to meet customer requirements for the Internet, Internet data center
(IDC), cloud computing, enterprise market applications, and telecom service applications.

The RH2288 V3 features high-performance computing, large storage capacity, low power
consumption, and high scalability and reliability. It supports virtualization, and is easy to
manage and deploy. It is ideal for virtualization, basic enterprise applications, telecom
services, and storage services such as distributed storage, data mining, electronic albums, and
videos.

Table 2-1

 describes the configurations of the RH2288 V3.

RH2288 V3 Server
User Guide

2 Overview

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

5

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands