manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 167

NOTE

The fan modules are hot-swappable. You can skip steps 

Step 8

 to 

Step 10

 when you can open the

chassis cover without removing the server. The scenarios include but are not limited to: (1) the server is
installed on holding or adjustable guide rails and (2) the server is not installed in a cabinet.

Figure 7-29

 Installing a fan module

Step 5

Close the memory window on the air duct. See step (2) in 

Figure 7-29

.

Step 6

Install full-height full-length riser cards if they are required. For details, see 

7.20 Installing a

Riser Card

.

Step 7

Install the chassis cover. For details, see 

7.12 Installing the Chassis Cover

.

Step 8

Install the RH2288 V3. For details, see 

3.4 Installing the Server

.

Step 9

Connect all external cables such as power and network cables. For details, see 

3.5

Connecting External Cables

.

Step 10

Power on the RH2288 V3. For details, see 

4.1 Powering On the Server

.

----End

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

155

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands