manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 156

a.

Open the plastic clip and place the power cable in the plastic clip. See step (1) in

Figure3 Connecting a power cable (secured with the PSU using a plastic clip)

.

Then close the plastic clip. See step (2) in 

Figure3 Connecting a power cable

(secured with the PSU using a plastic clip)

.

Figure 7-17

 Connecting a power cable (secured with the PSU using a plastic clip)

b.

Open the lock of the plastic clip. See a of step (3) in 

Figure3 Connecting a power

cable (secured with the PSU using a plastic clip)

. Slide the plastic clip towards

the PSU socket to ensure that the plastic clip is close to the connector of the power
cable. See b of step (3) in 

Figure3 Connecting a power cable (secured with the

PSU using a plastic clip)

.

----End

7.10.2 Installing a DC PSU

Install a DC PSU to replace the original one.

A DC PSU needs to be added to improve reliability when the RH2288 V3 is configured with
only one DC PSU.

Procedure

Step 1

Wear an ESD wrist strap. For details, see 

1 Safety Instructions

.

Step 2

Remove the PSU to be replaced. For details, see 

7.9.2 Removing a DC PSU

.

Step 3

Take the spare DC PSU out of its ESD bag.

Step 4

Push the spare DC PSU along the guide rails into a slot (for example, slot 1) until you hear a
sound.

The PSU latch snaps in so that the PSU does not move. See 

Figure 7-18

.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

144

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands