Procedure
Step 1
Run the
system-view
command, enter the system view.
Step 2
Run the
nqa
test-instance
admin-name
test-name
command, enter the NQA test instance view.
Step 3
Run the
clear-records
command in the NQA view to clear history statistics on NQA tests and
test results.
----End
6.36.3 Debugging NQA
This part describes how to debug test instances.
Prerequisite
When a fault occurs, run the following
debugging
command in the user view to debug NQA
and locate the fault.
Context
CAUTION
Debugging affects the performance of the system. So, after debugging, run the
undo debugging
all
command to disable it immediately.
Procedure
Step 1
Run the
debugging nqa all
command in the NQA view to enable NQA debugging.
----End
6.37 Configuration Examples
This section provides several configuration examples of NQA.
6.37.1 Example for Configuring the ICMP Test
6.37.2 Example for Configuring the FTP Download Test
6.37.3 Example for Configuring the FTP Upload Test
6.37.4 Example for Configuring the HTTP Test
6.37.5 Example for Configuring the DNS Test
6.37.6 Example for Configuring the Traceroute Test
6.37.7 Example for Configuring the SNMP Query Test
6.37.8 Example for Configuring the TCP Test
6.37.9 Example for Configuring the UDP Test
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6 NQA Configuration
Issue 03 (2010-09-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-139
