snmp-agent mib-view included b interfaces
snmp-agent usm-user v3 NMS1 test1 authentication-mode md5 TV"8'@O_6I!
PN<^R;_><IA!! privacy-mode des56 a>;@2Y`MQRZS<EPZ].X-!!!!
snmp-agent usm-user v3 NMS2 test2 authentication-mode md5 TV"8'@O_6I!
PN<^R;_><IA!! privacy-mode des56 a>;@2Y`MQRZS<EPZ].X-!!!!
#
return
1.23.5 Example for Configuring Batch Statistics Collection
Networking Requirements
, if you configure the batch statistics collection on the Switch, the
Switch is capable of uploading the statistics files in batches to the specified FTP server after
statistics collection completes.
Figure 1-7
Networking diagram for configuring the batch statistics collection
IP Network
FTP
Server
Switch
GE1/0/1
VLANIF100
2.2.2.1/24
Configuration Roadmap
The configuration roadmap is as follows:
1.
Enable the function of batch statistics collection on the Switch.
2.
Configure a statistics file, including statistics collection interval, statistics uploading
interval, period for reserving the statistics file, and the primary URL to which the statistics
file is uploaded.
3.
Configure the statistics objects.
4.
Enable the statistics file.
Data Preparation
To complete the configuration, you need the following data:
l
Connection between the remote FTP server and the Switch
l
User name, password, and host name (or IP address) of the FTP server required by the
Switch
Procedure
Step 1
Enable the function of batch statistics collection on the Switch.
<Quidway>
system-view
[Quidway]
sysname Switch
[Switch]
bulk-stat enable
Info:Succeeded in enabling the bulk stat function.
1 SNMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
1-86
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
