Huawei Quidway S5000 Series Routine Maintenance Download

Page: 51 / 68

Parameter

Description

Status

This parameter indicates the running status of a fan. The status can be

Normal

Fault

----End

Exception Handling

If the running status of the fan is

Fault

, see “

Fan Failure

” in the

OceanStor S5000 Series

Storage System Alarm Reference

If an alarm that is related to the fan is displayed on the alarm interface, handle it by referring
to the suggestion in the alarm items.

If the fault persists, contact the technical support engineers.

5.4 Checking the Status of the Power Supply

This section describes how to check the power supply on the controller subrack through the
OSM.

Reference Standard

No new alarms related to the power supply are displayed on the alarm interface.

The running status of the power supply is

Normal

Procedure

Step 1

Step 2

On the main menu, click

Device

Step 3

In the navigation, click

Controller Subrack xx

(

indicates the controller subrack ID).

NOTE

The parameters of the power supply in the disk subrack is the same as controller subrack. To check the
status of the power supply in the disk subrack, click

Device

on the main menu, and then click

Disk Subrack

(

indicates the disk subrack ID) in the navigation tree.

Step 4

In the navigation tree, click

PEM

Step 5

Click the

PEM0

PEM1

tab to view the information about the PEM. The parameter description

is shown in

Table 5-4

Parameter description of power supply status interface

Parameter

Description

Subrack ID

This parameter indicates the ID of the disk subrack where the PEM is located.

OceanStor S5000 Series Storage System
Routine Maintenance

5 Routine Maintenance Guide of the OSM

Issue 01 (2010-04-20)

Huawei Proprietary and Confidential

5-7

Summary of Contents for Quidway S5000 Series





































































Search results

Summary of Contents for Quidway S5000 Series

Reviews:

Related manuals for Quidway S5000 Series

Brands by name

Popular brands

Huawei Quidway S5000 Series, Routine Maintenance

Search results

Summary of Contents for Quidway S5000 Series

Reviews:

Related manuals for Quidway S5000 Series

Brands by name

Popular brands