Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-71
1.3.12 reset stop-accounting-buffer
Syntax
reset stop-accounting-buffer
{
hwtacacs-scheme
hwtacacs-scheme-name
|
session-id
session-id
|
time-range
start-time
stop-time
|
user-name
user-name
}
View
User view
Parameter
hwtacacs-scheme
hwtacacs-scheme-name
: Configures to delete the
stop-accounting requests from the buffer according to the specified HWTACACS
scheme name. The
hwtacacs-scheme-name
specifies the HWTACACS scheme
name with a character string of up to 32 characters, excluding forward slashes (/),
colons (:), asterisks (*), question marks (?), less-than signs (<), and greater-than
signs (>).
session-id
session-id
: Displays information on buffered stop-accounting requests
according to the session ID specified by
session-id
, a character string of up to 50
characters.
time-range
start-time
stop-time
: Displays information on buffered stop-accounting
requests according to the request time, where,
start-time
is the start time of the
stop-accounting request;
stop-time
is the end time of stop-accounting request. This
argument is in the format hh:mm:ss - mm/dd/yyyy or
hh:mm:ss-yyyy/mm/dd
and is
used to display the buffered stop-accounting requests from the start time to the end
time.
user-name
user-name
: Displays information on buffered stop-accounting requests
according to the user name specified by
user-name
, a character string of up to 80
characters, excluding forward slashes (/), colons (:), asterisks (*), question marks (?),
less-than signs (<), and greater-than signs (>). Moreover, “@” can appear no more
than once, and the user name (the part before “@”, the user ID) can not exceed 55
characters; the domain name (the rest part after “@”) cannot exceed 24 characters.
Description
Use the
reset stop-accounting-buffer
command to clear the stop-accounting
requests that have no response and are buffered on the switch.
Related command:
stop-accounting-buffer enable
,
retry stop-accounting
,
display stop-accounting-buffer
.
Example
# Delete the buffered stop-accounting requests that are according to the HWTACACS
scheme “hwt1”.
