Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-32
Acct Receive: 20 Acct Send: 20
1.2.5 display radius scheme
Syntax
display radius
[
radius-scheme-name
]
View
Any view
Parameter
radius-scheme-name
: Name of a RADIUS scheme, a character string of up to 32
characters.
Description
Use the
display radius scheme
command to display the configuration information
about one specific or all RADIUS schemes
Related command:
radius scheme
.
Example
# Display the configuration information about all RADIUS schemes.
<Quidway> display radius scheme
------------------------------------------------------------------
SchemeName =system Index=0 Type=huawei
Primary Auth IP =127.0.0.1 Port=1645
Primary Acct IP =127.0.0.1 Port=1646
Second Auth IP =0.0.0.0 Port=1812
Second Acct IP =0.0.0.0 Port=1813
Auth Server Encryption Key= huawei
Acct Server Encryption Key= huawei
Accounting method = required
Accounting-On packet enable, send times = 15 , interval = 3s
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts =5
Retry sending times of noresponse acct-stop-PKT =500
Quiet-interval(min) =5
Username format =without-domain
Data flow unit =Byte
Packet unit =1
unit 1 :
Primary Auth State=active, Second Auth State=block
Primary Acc State=active, Second Acc State=block
