Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-12
1.1.10 display local-user
Syntax
display local-user
[
domain
isp-name
|
idle-cut
{
disable
|
enable
} |
vlan
vlan-id
|
service-type
{
ftp
|
lan-access
|
ssh
|
telnet
|
terminal
} |
state
{
active
|
block
} |
user-name
user-name
]
View
Any view
Parameter
domain
isp-name
: Displays all local users belonging to the specified ISP domain.
Where,
isp-name
is the name of an ISP domain, a character string of up to 24
characters. You can only specify an existing ISP domain.
idle-cut
{
disable
|
enable
}: Displays the local users who are inhibited from enabling
the idle-cut function, or the local users who are allowed to enable the idle-cut function.
Where,
disable
specifies the inhibited local users and
enable
specifies the allowed
local users.
vlan
vlan-id
: Displays the local users belonging to the specified VLAN. Where,
vlan-id
ranges from 1 to 4094.
service-type
: Displays the local users of the specified type. You can specify one of
the following user types:
ftp
,
lan-access
(generally, this type of users are Ethernet
access users, for example, 802.1x users),
ssh
,
telnet
,
terminal
(this type of users are
terminal users who log into the switch through the Console port).
state
{
active
|
block
}: Displays the local users in the specified state. Where
active
represents the users allowed to request network services, and
block
represents the
users inhibited to request network services.
user-name
user-name
: Displays the local user who has the specified user name.
Where,
user-name
is a character string of up to 80 characters. The string cannot
contain the following characters: /:*?<>. It can contain no more than one @ character.
The pure user name (user ID, that is, the part before @) cannot be longer than 55
characters, and the domain name (the part behind @) cannot be longer than 24
characters.
Description
Use the
display local-user
command to display information about specified or all
local users.
Related command:
local-user
.
Example
# Display information about all local users.
