background image

5.1 Indicators on the Front Panel

This section describes the indicators on the S3300 front panel.

Indicators of a Non-PoE S3300

S3328TP-SI is a non-PoE switch that has a single power supply unit.

Figure 5-1

 S3328TP-SI indicators

1 2

3

 

Table 5-1

 Description of S3328TP-SI indicators

No.

Indicator

Identifier

Status

Description

1

Power
indicator

PWR

Off

The switch is powered off.

Green

The switch is powered on.

2

System
status
indicator

RUN

Off

The system is not operating.

Green

The system is not operating
properly or is starting.

Blinking
green

The system is operating
properly.

3

Port
indicator

LNK/ACT

Off

The interface is not connected
or has been shut down.

Green

The interface is connected.

Blinking
green

The interface is sending or
receiving data.

 

Indicators of a PoE S3300

S3352P-PWR-EI is a PoE switch.

Figure 5-2

 S3352P-PWR-EI indicators

2

3

4

5

1

5 List of Indicators

Quidway S3300 Series Ethernet Switches

Hardware Description

5-2

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 01 (2011-01-30)

Summary of Contents for Quidway S3300 Series




































































Reviews: